A dechlorination pathway for synthesis of horn shaped carbon nanotubes and its adsorption properties for CO2, CH4, CO and N2.

Autor: Sawant SY; Discipline of Inorganic Materials and Catalysis, Central Salt & Marine Chemicals Research Institute, Council of Scientific & Industrial Research (CSIR), G B Marg, Bhavnagar, Gujarat, India., Somani RS, Bajaj HC, Sharma SS
Jazyk: angličtina
Zdroj: Journal of hazardous materials [J Hazard Mater] 2012 Aug 15; Vol. 227-228, pp. 317-26. Date of Electronic Publication: 2012 May 27.
DOI: 10.1016/j.jhazmat.2012.05.062
Abstrakt: Using metallic copper as reductant and tetrachloroethylene as carbon precursor, a simple, low temperature solvothermal method for the synthesis of horn shaped carbon nanotubes is reported. The detail study of reaction parameters such as temperature, time, carbon precursor amount, type and catalyst proportion has been carried out to optimize the conditions wherein that the copper metal (10 g) mediated reduction of tetrachloroethylene (25 mL) at 200°C for 5h resulted in the horn shaped carbon nanotubes with high yield and structural selectivity. The adsorption properties of horn shaped carbon nanotubes were investigated for carbon dioxide, methane, carbon monoxide and nitrogen as adsorbate by volumetric measurements up to 850 mm Hg. The prepared horn shaped carbon nanotubes showed good adsorption capacity for CO(2) (45 cm(3)/g) and CO (17 cm(3)/g), at 303 K and 850 mm Hg pressure, with high equilibrium selectivity (73.3 for CO(2) and 110.7 for CO at 318 K) and capacity selectivity (9.1 for CO(2) and 3.1 for CO at 850 mm Hg and 318 K) over nitrogen which provides the tool for the separation of CO(2) from its mixture with nitrogen observed in flue gas of thermal power plants and boilers, as well as with CO such as syngas.
(Copyright © 2012 Elsevier B.V. All rights reserved.)
Databáze: MEDLINE
Externí odkaz: