[Effect of investment composition ratio for pure titanium crown and bridge on some mechanical properties of mould].

Autor:	Yang SF; Dental Institute, General Hospital of PLA, Beijing 100853, China. yangyangfeifei@yahoo.com.cn, Wang YX, Guo TW, Liu HC
Jazyk:	čínština
Zdroj:	Zhonghua kou qiang yi xue za zhi = Zhonghua kouqiang yixue zazhi = Chinese journal of stomatology [Zhonghua Kou Qiang Yi Xue Za Zhi] 2011 Nov; Vol. 46 (11), pp. 688-91.
Abstrakt:	Objective: To determine the optimal composition of a self-developing investment material by measuring physical and mechanical properties of mould. Methods: L(9) (3(4)) orthogonal design was adopted. One hundred and fifty specimens with the size of 80 mm × 20 mm × 20 mm were prepared to measure the atmospheric temperature bending strength, high temperature bending strength and residual bending strength. Nine specimens with the size of 5 mm diameter 25 mm heigh were prepared to survey the thermal expansion curve from ambient temperature to 1150°C. Results: Strengths were greatly affected by fine powder proportion in refractory and water/powder ratio. When the content of fine powder was 35% and water/powder ratio was 1:7.5, adequate atmospheric temperature strength and high temperature strength could be achieved. Moreover, the residual strength was moderate. The thermal extension curves of specimens in experiment group were almost similar. And the average linear expansion coefficient was (4 ∼ 5) × 10(-6)/°C. Conclusions: The three kinds of bending strength of self-developing investment material are compared with commercialized investment material for titanium casting when water/powder ratio and the content of fine powder are carefully controlled.
Databáze:	MEDLINE
Externí odkaz:	Zobrazit plný text záznamu