| Autor: |
Hammouda IM; Faculty of Dentistry, Mansoura University, Al Gomhoria Street, Mnsoura, Egypt. imh100@hotmail.com |
| Jazyk: |
angličtina |
| Zdroj: |
Journal of the mechanical behavior of biomedical materials [J Mech Behav Biomed Mater] 2009 Jan; Vol. 2 (1), pp. 73-81. Date of Electronic Publication: 2008 Apr 23. |
| DOI: |
10.1016/j.jmbbm.2008.04.002 |
| Abstrakt: |
This study investigated the strengthening effect of glass fibers when added to conventional glass-ionomer restorative material. Glass fibers were incorporated into glass-ionomer powder in 3 wt% and 5 wt%. The fibers used had 1 mm length and 10 microm thickness. These criteria of fiber length, diameter, and concentration represent a new approach for reinforcing conventional glass-ionomer [Medifill, conventional restorative glass-ionomer]. The mechanical properties tested were diametral tensile strength, hardness, flexural strength, flexural modulus and fracture toughness after 24-h and 7-days of storage in deionized water. Glass short fibers were mixed thoroughly into the glass-ionomer powder before mixing with the cement liquid. Samples of specific dimensions were prepared for each time interval and fiber loading according to the manufacturer's instructions and international standards. Hardness was measured using a micro-hardness tester at 100 gram applied load for 15 s. The other mechanical properties were measured using a Lloyd universal testing machine. The results showed increased diametral tensile strength, flexural strength, flexural modulus, and fracture toughness by the addition of glass fibers. There was an appreciable increase of the tested mechanical properties of glass-ionomer restorative material as a result of increasing fiber loading and water storage for 1 week. It was concluded that conventional glass-ionomer can be reinforced by the addition of short glass fibers. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
Full Text from ScienceDirect