| Abstrakt: |
Excessive carbon dioxide (CO2) emissions can lead to environmental problems, and the use of phase change absorbents for CO2 capture has received much attention due to their excellent absorption and desorption properties. Herein, a novel liquid–liquid phase change absorbent consisting of N‐aminoethylpiperazine (AEP), diethylene glycol dimethyl ether (DEGDME), and H2O is utilized. Under the optimal absorption conditions, the absorption capacity is 1.23 mol CO2·mol−1 amine. The rich‐phase viscosity of the AEP/DEGDME/H2O solution is only 6.2 mPa s−1, and the rich phase‐to‐volume ratio is 52.7%, which is suitable for industrial applications. After five cycles of absorption–desorption experiments, the cyclic capacity reaches 0.62 mol CO2·mol−1 amine. However, it should be noted that this leads to an increase in the viscosity of the solution with time. The 13C Nuclear Magnetic Resonance characterization is used to analyze the material distribution and phase separation mechanism, and it is found that during the absorption process, the carbamate and carbonate products generated by the reaction of the amino group in the AEP with CO2 are mainly located in the rich phase, while the DEGDME and H2O mainly remain in the lean phase. In the desorption process, most of the absorbed products are decomposed, and the regeneration efficiency is 66.8%. Through the regeneration energy consumption experiment, when the regeneration efficiency is 56%–67%, the total regeneration energy consumption is 2.71–2.89 GJ t−1 CO2, which is 0.91–1.09 GJ t−1 CO2 lower than that of the regeneration efficiency of 30 wt% MEA solution at 63%, which indicates that this absorbent has certain energy‐saving advantages. [ABSTRACT FROM AUTHOR] |
Plný text