| Autor: |
Ahmadmoazzam, Mehdi1 (AUTHOR), Akbari, Hamed1 (AUTHOR), Adibzadeh, Amir1,2 (AUTHOR), Pourfadakari, Sudabeh3 (AUTHOR), Akbari, Hesam1 (AUTHOR) akbarihesam496@gmail.com |
| Předmět: |
|
| Zdroj: |
Environmental Technology. Jul2024, Vol. 45 Issue 17, p3456-3467. 12p. |
| Abstrakt: |
This study assessed wastewater treatment by visible-light/Peroxymonosulfate process using its linking with TiO2@Fe3O4 nanoparticles coated on chitosan. Meropenem and Imipenem photodegradation was evaluated as a model-resistant contaminant by TiO2@Fe2O3/chitosan nanocomposite. The synthesised TiO2@Fe2O3/chitosan was characterised using various techniques. Fe2O3 and TiO2 nanoparticles on the chitosan surface were affirmed via XRD, EDX, and FTIR findings. The FESEM and TEM results verified the deposition of TiO2@Fe2O3 on the chitosan surface. Under optimum circumstances (pH = 4, catalyst dosage = 0.5 g/L, antibiotics concentration = 25 mg/L reaction time = 30 min, and PMS = 2 mM), maximum degradation efficiency was obtained at about 95.64 and 93.9% for Meropenem and Imipenem, respectively. Also, the experiments demonstrated that TiO2@Fe2O3/chitosan had a better performance than photolysis and adsorption by catalyst without visible light irradiation in degrading antibiotics. The scavenger tests confirmed that ${\rm O}_2^{\cdot -}$ O 2 ⋅ − , ${\rm SO}_4^{\cdot -}$ SO 4 ⋅ − , ${\rm HO}\cdot$ HO ⋅ , and h+ are present simultaneously during the pollutant photodegradation process. After five recovery cycles, the system eliminated over 80 percent of antibiotics. It suggested that the catalyst's capacity to be reused may be cost-effective. [ABSTRACT FROM AUTHOR] |
| Databáze: |
GreenFILE |
| Externí odkaz: |
|
