Adsorption of Oil from Industrial Wastewater with Eucalyptus globulus Labill. Bark: Optimization Study.

Autor: Aboulsoud, Yasmin I. E.1 (AUTHOR) yasminaboulsoud@hotmail.com
Předmět:
Zdroj: Water, Air & Soil Pollution. May2024, Vol. 235 Issue 5, p1-14. 14p.
Abstrakt: Oily wastewater is one of the most hazardous contaminants that can hurt the ecosystem. There is an urgent need to adopt an efficient, eco-friendly, and low-cost material to replace the old traditional treatment methods of oily wastewater that were very expensive in addition to their relatively low efficiency. Eucalyptus bark is considered one of the materials that are rarely used in this field, although it has the characteristics that qualify it to be a distinguished and promising one. The optimum conditions of using Eucalyptus globulus Labill. (Blue gum) bark in the removal of oil from prepared aqueous solutions were concluded before applying in the treatment of real oily industrial wastewater from New Borg El-Arab City, Egypt. The sequential optimization adsorption results were as follows: initial oil concentration, 500 mg/l; adsorbent dosage, 0.5 g/l; pH, 3; exposure time, 45 min; temperature, 20 °C; and shaking rate, 300 rpm. The pretreatment of biomass with H3PO4 proved it to be superior in the oil removal process where the efficacy reached 450.69 mg/g, while the unmodified form came second where the adsorption efficacy reached 395.86 mg/g, after that the NaOH-modified form came third by efficacy reached 315.85 mg/g. The results of SEM elucidated this order of efficacy according to the porosity of the bark surface. FTIR analysis indicated that OH, carboxylic C = O, and carboxylic C-O groups are the contributing groups in the oil adsorption process for the three forms of Eucalyptus bark. The reusability of Eucalyptus bark using n-hexane for one cycle reached 96.34, 97.13, and 95.83% for unmodified, H-modified, and OH-modified forms, respectively, and for five cycles reached 56.29, 58.01, and 55.81% for unmodified, H-modified, and OH-modified forms, respectively. The application of Eucalyptus bark in the H-form in the treatment of real oily wastewater was achieved by efficacy ranging between 91.46 and 96.23% which proves the excellence of Eucalyptus bark in the treatment of oily wastewater. [ABSTRACT FROM AUTHOR]
Databáze: GreenFILE