| Autor: |
Brancher, Marlon1, Franco, Davide1, de Melo Lisboa, Henrique1 |
| Předmět: |
|
| Zdroj: |
Environmental Technology. Nov2016, Vol. 37 Issue 22, p2852-2864. 13p. |
| Abstrakt: |
To promote the photocatalytic oxidation (PCO) of hydrogen sulfide (H2S) in the gas phase, TiO2-coated glass fiber filters were packed in an annular photoreactor. Glass fibers coated with TiO2thin films were characterized structurally and morphologically by field emission gun scanning electron microscopy (FEG-SEM), scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray diffractometry (XRD). Flow rate and H2S inlet concentration were evaluated to determine the performance of the reactor. Removal efficiencies up to 99% were achieved for flow rate of 25 L h−1(residence time of 121 s) and H2S inlet concentration from 12 to 14 ppmv. The long-term experiment presented H2S removal of 89% for 16 h. After 28 h of continuous use, H2S degradation was observed at 64%, which suggests that the photocatalyst was losing activity due to deactivation. Moreover, the kinetics of the PCO of H2S according to the Langmuir–Hinshelwood (L–H) approach along with the mass balance of a plug-flow reactor was modeled. The reaction constant (k) was calculated at approximately 10.5 μmol m−3s−1and the adsorption constant (K) of approximately 5263 m−3mol with linearity (R2) of 0.98. [ABSTRACT FROM AUTHOR] |
| Databáze: |
GreenFILE |
| Externí odkaz: |
|
