| Autor: |
Ramesh Velumayil, Anand Palanivel |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Polymers, Vol 14, Iss 7, p 1382 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2073-4360 |
| DOI: |
10.3390/polym14071382 |
| Popis: |
The present work investigates the fabrication of Kevlar/epoxy and basalt/epoxy and Kevlar/basalt/epoxy hybrid composite laminates and compares their mechanical properties. Mechanical characterization tests, including tension, flexural, impact and hardness tests, as per ASTM standards, were conducted on coupons cut out from the fabricated composite panels. A hand layup fabrication technique was used to fabricate composite panels with seven layers in them. Eight such laminates, with two containing pure Kevlar/epoxy and basalt/epoxy and the remaining ones containing Kevlar/basalt, were stacked in different sequences and impregnated in an epoxy matrix to provide a hybrid configuration. The microscopic examination of the fabricated laminates revealed that there was good bonding between the reinforcements and matrix material. Out of the eight composite panels including the hybrids, the ones with the pure basalt/epoxy exhibited more tensile and flexural strength than its Kevlar/epoxy counterpart due to its higher density value. The tensile and flexural strength of the hybrid laminates (i.e., combinations of basalt/Kevlar/epoxy) showed values in between pure basalt/epoxy and Kevlar/epoxy laminates in general. A similar trend was observed in terms of hardness and impact strength for the fabricated composite laminates. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
