| Autor: |
Vadim S. Gadzhiagaev, Nikolay V. Lasunin, Dmitriy N. Okishev, Anton N. Konovalov, Denis A. Golbin, Vasily A. Cherekaev, Natalia K. Serova, Nadezhda N. Grigorieva |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
World Neurosurgery: X, Vol 22, Iss , Pp 100281- (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2590-1397 |
| DOI: |
10.1016/j.wnsx.2024.100281 |
| Popis: |
Purpose: To report our experience with patient specific implants for one-step orbit reconstruction following hyperostotic SWM removal and to describe the evolution of the technique through three surgical cases. Methods: Three cases of one-step SWM removal and orbit reconstruction are described. All cases are given consecutively to describe the evolution of the technique. Hyperostotic bone resection was facilitated by electromagnetic navigation and cutting guides (templates). Based on a 3D model, silicone molds were made using CAD/CAM. Then PMMA implant was fabricated from these molds. The implant was adjusted and fixed to the cranium with titanium screws after tumor removal. Results: Following steps of the procedure changed over these series: hyperostotic bone resection, implant thickness control, implant overlay features, anatomic adjustments, implant fixation. The proptosis resolved in all cases. In one patient the progressive visual acuity deterioration was recognized during the follow-up. No oculomotor disturbances and no tumor regrowth were found at the follow-up. Conclusion: CAD/CAM technologies enable creation of implants of any size and configuration, and thereby, to increase the extent of bony resection and lower the risk of tumor progression. The procedure is performed in one step which decreases the risk of postoperative morbidity. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
