Autor: |
Xiang Cai, Mengmeng Yang, Yanxin Qiao, Zan Wang, Jian Zhou, Feng Xue |
Jazyk: |
angličtina |
Rok vydání: |
2023 |
Předmět: |
|
Zdroj: |
Journal of Materials Research and Technology, Vol 26, Iss , Pp 5801-5815 (2023) |
Druh dokumentu: |
article |
ISSN: |
2238-7854 |
DOI: |
10.1016/j.jmrt.2023.08.313 |
Popis: |
This paper discusses the differences in the microstructure, mechanical properties, wear resistance, and corrosion behavior of nickel-aluminum bronze (NAB) alloys fabricated via wire arc additive manufacturing (WAAM) versus casting. The grain size of the WAAM-NAB alloy is smaller than that of the as-cast NAB alloys; furthermore, the precipitation of the large size κⅠ phase is completely suppressed while the remaining precipitated κ phases are limited and reduced in size. Compared with the cast alloy, the WAAM-NAB alloy indicates a higher bending and tensile strength by 46% and 18%, respectively. The coefficient of friction of WAAM-NAB alloy is 56% lower than cast alloys. Additionally, the WAAM-NAB alloy shows greater corrosion resistance against seawater, in that it only exhibited residual β phase corrosion, whereas the cast alloy sustained severe selective-phase corrosion. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|