| Autor: |
Marian Janusz Łopatka, Piotr Krogul, Arkadiusz Rubiec, Mirosław Przybysz |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Energies, Vol 15, Iss 15, p 5596 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
1996-1073 |
| DOI: |
10.3390/en15155596 |
| Popis: |
The effective use of robotic manipulators is particularly important when carrying out hazardous tasks. Often, for this type of mission, manipulators equipped with a hydraulic drive system are used, and their work results primarily from the implementation of precise movements through their effectors. In heavy manipulators, limiting the uncontrolled movement resulting from high inertia and relatively low stiffness has an impact on the improvement of the control precision. Therefore, the paper presents experimental studies that allow the assessment of the impact of the use of counterbalance valves on the precision and dynamics of a manipulator with a hydrostatic drive system. The tests were carried out for a wide range of effector velocities along a horizontal trajectory, on the basis of which, it was found that it was possible to improve the precision and dynamics of the work of such manipulators due to the precision of the trajectory and pressures in the drive system. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
