| Autor: |
Sri Atmaja P. Rosyidi, Nur Izzi Md. Yusoff, Norfarah Nadia Ismail, Muhamad Razuhanafi Mat Yazid |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Ain Shams Engineering Journal, Vol 12, Iss 1, Pp 367-380 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2090-4479 |
| DOI: |
10.1016/j.asej.2020.05.006 |
| Popis: |
This paper employs an improved continuous wavelet transform (CWT) technique of Gaussian derivative function and impulse response filtering (IRF) in seismic surface wave analysis to improve data analysis in the Spectral Analysis of Surface Wave (SASW) method. Two procedures were used: first, the response spectrum of interest was chosen using a time–frequency wavelet spectrogram. Then, noisy distortions were eliminated by utilizing a time–frequency wavelet and impulse response filtering. The outcomes show that the SASW method is able to identify the surface wave velocity which coincides with the dynamic stiffness parameters of Portland Cement Concrete (PCC) slabs. The values of surface wave velocity increased during the curing stage, and in situ measurement of wave velocity could be helpful in determining the degree of curing. A good congruence has been demonstrated between the stiffness of PCC obtained from SASW measurements vis a vis that obtained using the American Concrete Institute (ACI) formulation. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
