Bond Strength of Porcelain to Milled Sintered and Casting Base Metal Alloys
| Autor: | Zahra Mohammadi, Meysam Mahabadi, Gholamreza Tabbakhian, Mahmud Talaakoob |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Journal of Dentistry, Vol 22, Iss 1, Pp 21-26 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2345-6485 2345-6418 |
| DOI: | 10.30476/DENTJODS.2020.84347.1076 |
| Popis: | Statement of the Problem: The success of metal-ceramic restorations depends on the bond strength between porcelain and alloy. These restorations can be fabricated through different casting and computer-aided design/computer-aided manufacturing (CAD/CAM) techniques. Purpose: This study aimed to compare the bond strength of porcelain to milled sintered (Sintron) and casting (Co-Cr and Ni-Cr) base metal alloys. Materials and Method: In this in vitro experimental study, 63 rectangular bars (25×3×0.5 mm) were fabricated of three base metal alloys: casting Ni-Cr, casting Co-Cr, and milled sintered Co-Cr alloy. Feldspathic porcelain (3×8 mm) was applied at the center of each bar with 1.5 mm thickness. The specimens were thermally aged. Bond strength was evaluated through three-point flexural test. Failure mode was evaluated by optical and electron microscope. Data were analyzed with one-way ANOVA and Tukey's post hoc test (α=0.05). Results: The mean flexural bond strength of porcelain to milled sintered Co-Cr alloy (24.58±5.16 MPa) was significantly higher than that of casting Ni-Cr (21.13±6.34 MPa) (p= 0.03) and casting Co-Cr (20.98±4.84 MPa) alloys (p= 0.04). However, the two casting alloys were not significantly different in this regard (p= 0.93). The failure mode in all specimens was of cohesive type. Conclusion: Bond strength of CAD/CAM milled sintered Co-Cr alloy was better than that of the conventional casting alloys and could serve as a suitable alternative to those alloys. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|