| Autor: |
Sergey Klyuev, Narman Ayubov, Marina Ageeva, Ekaterina Fomina, Aleksandr Klyuev, Kseniia Usanova, Elena Shorstova |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Materials Research and Technology, Vol 32, Iss , Pp 1996-2004 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2238-7854 |
| DOI: |
10.1016/j.jmrt.2024.08.052 |
| Popis: |
The object of research is fine-grained concrete with carbon black additive obtained from the recycling of rubber tires. This study aims to determine a method for introducing carbon black into fine-grained concrete that achieves the best strength characteristics. The first method involves the preliminary preparation of a suspension by mixing a superplasticizer, carbon black, and part of the water. The second is the granulation of carbon black together with a superplasticizer in the ratio water: superplasticizer = 9: 1, followed by its introduction into the dry mixture and the addition of water at the last stage of mixing the raw material mixture. The addition of carbon black in powder form to the concrete mixture resulted in a decrease in strength from 35.1 MPa (without carbon black) to 34.9–25.6 MPa (with 4–12% carbon black). The effectiveness of the method of introducing granular carbon black was established, with an increase in strength by 40% in relation to the mixture obtained by the first method. The best strength of 50 MPa was demonstrated by the mix with 4% granular carbon black, which was 6% higher than that of the reference mix. Granulation of carbon black makes it possible to reduce its hydrophobicity and solve the problem of uniform distribution of carbon particles during homogenization of the raw material mixture in the presence of water. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
