Examination of the Shear Force Resistance of Laminate Veneers Adhered with Different Resin Cements
| Autor: | Emel Arslan, Zeynep Yeşil Duymuş |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Cumhuriyet Dental Journal, Vol 25, Iss Suppl/2, Pp 38-45 (2022) |
| Druh dokumentu: | article |
| ISSN: | 1302-5805 2146-2852 |
| DOI: | 10.7126/cumudj.1187835 |
| Popis: | OBJECTIVES: This study investigated the mechanical properties of laminate veneers to determine their resistance to the shear force of three different types of cement used in the restorations. MATERIAL and METHODS: Laminate veneers were prepared using the standard tooth preparation methods for 30 extracted maxillary central incisors. To standardize the depth, guide burs were used to prepare a depth of 0.5 mm from the buccal angle. The samples were allocated into three randomized groups (n = 10): Group A (resin using the total etch method and Variolink Esthetic DC resin cement; Group B (resin using the PANAVIA F2.0 self-etch method; and Group C (self-adhesion bonded with Rely X U200 resin cement). The prepared specimens were stored in distilled water for one week before a shear test was used to determine the resistance of the veneers to the bonding. The obtained data were evaluated statistically. RESULTS: The values of the shear bond strength were statistically significant depending on the type of resin cement that was applied (p ˂ 0.05). The specimens that were cemented using the total-etch method (18.79±4.48 MPa) had the lowest shear force value. The obtained data were evaluated statistically by Tukey multiple comparison test (p > 0.05). CONCLUSIONS: The cement is a highly effective factor in the bonding between fixed prosthetic restorations and the abutment tooth, and the cement used must have sufficient resistance to shear forces. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|