The analysis of the plastic deformation of two-layered magnesium – aluminium alloys (AZ31 – Al)
| Autor: | R. Mola, S. Mróz, P. Szota, S. Sawicki |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Metalurgija, Vol 55, Iss 4, Pp 625-627 (2016) |
| Druh dokumentu: | article |
| ISSN: | 0543-5846 1334-2576 |
| Popis: | The paper presents the results of physical modelling of the plastic deformation of the two-layered AZ31 - Al alloys. The AZ31 - Al feedstock was produced using the diffusion bonding method. Heating under pressure led to the formation of a continuous layer of the intermetallic phases at the bond interface of AZ31 - Al. A compression test was used to determine the plastic deformation of the two-layered AZ31 - Al alloys. Based on the analysis of the investigation results it has been found that, as the strain rate decreases and temperature increases, the intermetallic phase yields, and a distinct thinning of the intermetallic phase layer has occurred in the zone directly affected by the anvil. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|