| Popis: |
The investigation of damage development is essential for the design and optimization of hybrid structures. This paper provides a reference for the structural design of brittle–ductile hybrid LVI-resistant laminates through analyzing the damage development mechanism of carbon/Kevlar fabric-reinforced composite laminates. The effects of Kevlar fabric hybrid ply and intercalation on the damage development of carbon/Kevlar composite laminates under low-velocity impact (LVI) were investigated using quasi-static indentation (QSI). It was found that an increase in the Kevlar hybrid ratio significantly reduced the peak load and stiffness of these laminates (the maximum decreases in strength and stiffness were 46.03% and 41.43%, respectively), while laminates with identical hybrid ratios but different plying configurations maintained a comparable stiffness under QSI, with differences of less than 5%. Interestingly, Kevlar fibers exhibited irregular fractures as the yarn was splitting, while carbon fibers presented neat breaks, which indicated material-specific failure modes. Notably, the introduction of Kevlar hybridization beyond pure Kevlar configurations (KKKK) resulted in a decrease in the percentage of fiber damage (CCCC, CCCK, CCKK, and KCCK accounted for 80%, 79.8%, 70%, and 60% of fiber damage, respectively), attributed to an increase in resin cracks and lower levels of Kevlar yarn breakage. The internal damage diameter of specimens was accurately predicted from the diameter of visible damage on the QSI surface. Compared with CCCC and CCKK setups, which are affected by resin cracks formed via the carbon surface on the loading side propagating along the yarn direction (including the yarn settling direction), KCCK demonstrated less delamination between the first and second ply. |
