Potential of New-Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond Coats
| Autor: | J. Cizek, M. Matejkova, J. Kouril, J. Cupera, I. Dlouhy |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Advances in Materials Science and Engineering, Vol 2016 (2016) |
| Druh dokumentu: | article |
| ISSN: | 1687-8434 1687-8442 |
| DOI: | 10.1155/2016/9070468 |
| Popis: | Electron beam (EB) technology treatment was carried out on CoNiCrAlY bond coats deposited on Inconel substrates via cold spray and HVOF techniques in dissimilar thicknesses. Such treatment was carried out with regard to the final materials microstructure, composition, surface roughness, and the quality of the coating-substrate interface. Following a multiple-step optimization of the processing parameters (such as beam pattern configuration, accelerating voltage, longitudinal speed, and multiple beam incidence), two final EB modifications were carried out on both coating types. It was found that the optimized EB treatment could lead to a significant alteration of the interface from a distinctive divide into smooth chemical and structural transition between the materials, significant decrease in surface roughness and porosity, and changes in mechanical properties (increase in Young’s modulus and decrease in hardness of the coating). |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|