| Autor: |
Kassoum Barry, Gisèle Laure Lecomte-Nana, Mohamed Seynou, Michael Faucher, Philippe Blanchart, Claire Peyratout |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Ceramics, Vol 5, Iss 1, Pp 75-96 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2571-6131 |
| DOI: |
10.3390/ceramics5010007 |
| Popis: |
Porous phyllosilicate-based ceramics were manufactured by freeze-tape casting from clays of different particle size and morphology in order to characterize their microstructure and stress to rupture changes before and after firing. Three raw clays were selected: HCR (77% Halloysite–10Å), KORS (29% kaolinite), and KCR kaolin (98% kaolinite). These clays exhibited a monomodal distribution and were used to prepare four slurries, three with each clay material and one consisting of a mixture of KCR and HCR labeled KHCR. After shaping by freeze-tape casting, the porosity and stress to rupture obtained by a biaxial flexural test were collected for disk-like samples after drying and sintering at 1200 °C. Results showed that KCR ceramic materials had the highest biaxial bending strength (70 ± 1.1 MPa) and those from KORS had the highest porosity value (80 ± 1%). SEM observation revealed a difference in microstructure and texture for the manufactured porous ceramic materials. In the KCR ceramic disks, the flattened pores appeared more textured, and the primary mullite crystallites formed a rigid skeleton within the amorphous phase. KORS ceramic materials showed a small quantity of secondary mullite needles which were randomly dispersed in a vitreous phase. The relatively important vitreous phase in the porous materials of HCR led to the bulk formation of small mullite particles. The biaxial flexural strength values were related to the presence of the mullite, as well as to the microstructure (volume, morphology, and size distribution of pores) after sintering. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
