Estimation of Geopotential Value W0 for the Geoid and Local Vertical Datum Parameters

Autor: Xinyu Liu, Shanshan Li, Jiajia Yuan, Diao Fan, Xuli Tan
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Remote Sensing, Vol 15, Iss 4, p 912 (2023)
Druh dokumentu: article
ISSN: 2072-4292
DOI: 10.3390/rs15040912
Popis: Unification of the global vertical datum has been a key problem to be solved for geodesy over a long period, and the main challenge for unifying the global vertical datum system is to determine the geopotential value W0 of the geoid and to calculate the vertical offset between the local vertical datum and the global vertical datum W0. The geopotential value W0 can be calculated using the grid mean sea surface (GMSS) data and the global geopotential model (GGM). In this study, this GMSS data was measured with adjustment methods and 24 years of merged multi-satellite altimetry data. The data of HaiYang-2A (HY-2A) and Jason-3 were first used to calculate W0. The geopotential value W0 was determined to be 62,636,856.82 m2s−2 by combining the EIGEN-6C4 (European Improved Gravity Model of the Earth by New Techniques) and the GMSS data. Then, the geopotential difference approach and geodetic boundary value problem (GBVP) approach were used to determine the vertical datum parameters in this study. To compensate for the omission error of the GGM, this study utilized the remove–compute–restore (RCR) technique and the residual terrain model (RTM)-recovered high-frequency gravity signals. Finally, as a result of the GBVP solution, the geopotential value of the Australian Height Datum (AHD) was 62,636,851.935 m2s−2, and the vertical offset of the AHD relative to the global vertical datum W0 was 0.4885 m. As a result of the geopotential difference approach, the geopotential value of the Chinese Height datum was 62636861.412 m2s−2, and the vertical offset of the Chinese Height datum was −0.4592 m.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje