Heat Transfer Research in Blown-Through Non-Passable Heating Mains Channels. Part 1
| Autor: | V. A. Sednin, T. V. Bubyr |
|---|---|
| Jazyk: | ruština |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Наука и техника, Vol 20, Iss 2, Pp 150-160 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2227-1031 2414-0392 |
| DOI: | 10.21122/2227-1031-2021-20-2-150-160 |
| Popis: | Abstract. To increase the efficiency of operation of heating networks located in non-passable channels, a schematic and structural solution of regenerative-utilization heat use was previously proposed and at the same time it is shown that it isdifficult to create an acceptable full-scale experimental installation or the difficulty of conducting a passive experiment on existing heating mains in non-passable channels. As an alternative solution for performing research, it is proposed to create and use a virtual experimental setup developed on the basis of the ANSYS software package, which has received wide recognition in the world. The initial results of model verification showed that the study of heat transfer and aerodynamics in blown-through non-passable heating mains using such a solution is promising. A study has been carried out using a virtual experimental setup based on a six-factor second-order rotatble plan containing 46 points on a hypersphere with six star points. It is shown that there is no need to randomize the order of conducting and repeating the study at the points of computational experiment plan. Second-order regression equations have obtained for calculating a complex of objective functions: the required air pressure to achieve a given flow rate, the intensity of heat transfer directly from the pipes of the heating main, as well as from the walls of the channel to the blown air. The geometry of the channels of typical standard sizes of heating mains, the length of the sections, the temperature of the outside air and soil, and the air flow rate in the channel have been taken as the influencing factors in the calculations. For the obtained regression equations, significant coefficients have been established and the transition from dimensionless to natural factors has been carried out. The adequacy of the obtained regression equations has been determined using standard statistical estimation methods based on the calculated values of the Fisher’s, Student’s and other criteria. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|