| Autor: |
Yanchun XU, Zimin MA, Xiaoer LI, Wei MIAO, Ermeng ZHANG, Wenhao JIANG, Yunliang ZHUO, Yuguo TIAN |
| Jazyk: |
čínština |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Meitan kexue jishu, Vol 51, Iss 7, Pp 64-71 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
0253-2336 |
| DOI: |
10.13199/j.cnki.cst.2021-1268 |
| Popis: |
Based on Zhaogu No. 1 Mine’s characters that are the overlying thick alluvium, multi-aquifers (groups) and thin bedrock, the water pressure of the gravel aquifer under the alluvial layer reaches 4.0 MPa, defined a high-pressure aquifer. To determine the influence of bedrock properties on roof water inrush and sand bursting, and ensure the normal mining around the thin bedrock area under groups, there were tests, point loading, dry saturated water absorption rate and indoor disintegration, of bedrock samples taken from hydrological survey holes to determine those properties and influence on retaining sand-proof pillars by analyzing the variation curves of various indexes of them with depth. The experiments’ results showed that the weathering depth of bedrock exceeds 20 m; the dry saturated water absorption rate of mudstone in the vertical depth ranging of 0−6.5 m from the bottom interface of the alluvial layer is greater than 15%. The mudstone exposed to water features muddy disintegration, broken rock fragments and mud blocks, which means it is good water-proof performance of effective bridging mining cracks and a protective layer for waterproof coal pillars; as the strength of weathered mudstone below the alluvial layer 0 to 11.4 m is lower than it of the fine gravel aquifer in the lower that of 4.0 MPa, the sand control coal pillar’s protective layer that is greater more than 11.4 m is cannot be entirely composed of weathered mudstone; due to strong resistance to disintegration and lower dry saturated water absorption rate of sandstone, the protective layer cannot be entirely composed of weathered sandstone. The compressive strength of weathered sandstone, when it is higher than 4.0 MPa, can effectively resist the overlying water head pressure. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
