| Autor: |
Ping Zhao, Zhanqi Wang, Youqiang Qiu, Panpan Guo |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Buildings, Vol 14, Iss 11, p 3604 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2075-5309 |
| DOI: |
10.3390/buildings14113604 |
| Popis: |
The objective of this paper is to investigate the influence of earthmoving vehicle load position on the deformation and internal force characteristics of a deep excavation (DE) support structure. The position of the earthmoving vehicle load near a DE is described by the horizontal distance between the earthmoving vehicle load and the DE. A two-dimensional finite element model is established for simulating DE engineering under the earthmoving vehicle load. The load of the earthmoving vehicle is treated as the static load, and the influence of the earthmoving vehicle load on the excavation support structure is considered from the static point of view. The numerical results of the finite element model agree well with the measured data from the field, which verifies the validity of the model. On the basis of this model, multiple models are established by changing the horizontal distance (D) between the earthmoving vehicle and the DE. The influence of D on the support structure and its critical magnitude for ensuring safety were studied. The results show that the underground diaphragm wall (UDW) is the main component for which horizontal displacement occurs under the earthmoving vehicle load. The horizontal displacements of the support structure exhibit an asymmetric distribution. When D decreases from 20 m to 0.5 m, the horizontal displacement of the UDW near the loading side increases, and the maximum horizontal displacement occurs at the top of the excavation support structure. The critical magnitude of D for ensuring safety is found to be 1 m. When D is less than 1 m, the DE is in an unsafe state. The UDW is the main component subject to the bending component. The bending moment distribution exhibits an “S” shape. The maximum bending moment increases with the decrease in D, and it occurs at the intersection of the second support and the UDW. As D decreases, the axial force in the first internal support changes from pressure to tension. The axial forces in the second and third internal supports are both pressures. The axial force in the third internal support is the largest. The research results have a positive effect on the design and optimization of DE support structures under the earthmoving vehicle load. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
