Dry metal forming of high alloy steel using laser generated aluminum bronze tools
| Autor: | Freiße Hannes, Köhler Henry, Seefeld Thomas, Vollertsen Frank |
|---|---|
| Jazyk: | English<br />French |
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | MATEC Web of Conferences, Vol 21, p 08011 (2015) |
| Druh dokumentu: | article |
| ISSN: | 2261-236X 20152108 |
| DOI: | 10.1051/matecconf/20152108011 |
| Popis: | Regarding the optimization of forming technology in economic and environmental aspects, avoiding lubricants is an approach to realize the vision of a new green technology. The resulting direct contact between the tool and the sheet in non-lubricated deep drawing causes higher stress and depends mainly on the material combination. The tribological system in dry sliding has to be assessed by means on the one hand of the resulting friction coefficient and on the other hand of the wear of the tool and sheet material. The potential to generate tailored tribological systems for dry metal forming could be shown within the investigations by using different material combinations and by applying different laser cladding process parameters. Furthermore, the feasibility of additive manufacturing of a deep drawing tool was demonstrated. The tool was successfully applied to form circular cups in a dry metal forming process. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|