| Autor: |
WANG Ju-tao, WANG Chun-jie, SONG Shun-guang |
| Jazyk: |
čínština |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
工程科学学报, Vol 39, Iss 7, Pp 1087-1093 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2095-9389 |
| DOI: |
10.13374/j.issn2095-9389.2017.07.015 |
| Popis: |
To improve the efficiency of frequency response function (FRF) model updating, the Kriging model is introduced into its optimization procedure, thus replacing the finite element model for iteration. The objective function is established based on the error of FRF curve at each corresponding frequency point, and a design of experiment (DOE) of the primary design parameters is performed. The sensitivity of each design is then assessed based on DOE results, and the parameters involved in model updating are selected. The Kriging model is constructed based on these selected parameters, and after confirming its response it participates in the model updating process. The GARTEUR aircraft model is used as an example, and it is found that based on acceleration FRF data, the FRF curve reappears at the checking point after model updating. The FRF curve is also predicted successfully when the structure is changed locally, and therefore the effectiveness of the Kriging method applied to FRF model updating is demonstrated. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
