| Autor: |
Gloria E. Pech-Can, Emmanuel A. Flores-Johnson, Jose G. Carrillo, Eral Bele, Alex Valadez-Gonzalez |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Composites Science, Vol 8, Iss 9, p 343 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2504-477X |
| DOI: |
10.3390/jcs8090343 |
| Popis: |
Polymeric foams are used in many applications, from packaging to structural applications. While polymeric foams have good mechanical performance in compression, they are brittle in tension and bending; fibre reinforcement can enhance their tension and flexural behaviour. This work reports a novel investigation of the mechanical properties of fibre-reinforced polyurethane (FRPU) foams with natural henequen fibres. Pull-out tests were performed with 10 mm fibres and various foam densities to identify the optimal density of 100 kg/m3. Thus, FRPU foams with this density and fibre contents of 1, 2 and 3 wt% were manufactured for mechanical testing. Compression tests showed an increase in the elastic modulus of the FRPU foam specimens compared to the unreinforced PU foam. The FRPU foams also exhibited higher yield stress, which was attributed to the reinforcing effect of the fibres on the cell walls. A maximum increase of 71% in the compressive yield stress was observed for the FRPU foam specimens with a fibre content of 2%. In addition, FRPU foam specimens absorbed more energy for any given strain than the unreinforced PU foam. Flexural tests showed the FRPU foams exhibited increased flexural strength compared to the unreinforced PU foam. A maximum increase of 40% in the flexural strength was observed for the FRPU foam with a fibre content of 1%. The findings reported here are significant because they suggest that FRPU foams incorporating natural henequen fibre exhibit promising potential as sustainable materials with enhanced mechanical properties. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
