Influence of the Polymeric Matrix on the Optical and Electrical Properties of Copper Porphine-Based Semiconductor Hybrid Films

Autor: Maria Elena Sánchez Vergara, Joaquín André Hernández Méndez, Daniela González Verdugo, Isabella María Giammattei Funes, Octavio Lozada Flores
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Polymers, Vol 15, Iss 14, p 3125 (2023)
Druh dokumentu: article
ISSN: 2073-4360
DOI: 10.3390/polym15143125
Popis: In this study, we assessed the electrical and optical behavior of semiconductor hybrid films fabricated from octaethyl-21H,23H-porphine copper (CuP), embedded in polymethylmethacrylate (PMMA), and polystyrene (PS). The hybrid films were characterized structurally and morphologically using infrared spectroscopy (IR), atomic force microscopy (AFM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Subsequently, the PMMA:CuP and PS:CuP hybrid films were evaluated optically by UV–vis spectroscopy, as well as electrically, with the four-point collinear method. Hybrid films present a homogeneous and low roughness morphology. In addition, the PS matrix allows the crystallization of the porphin, while PMMA promotes the amorphous structure in CuP. The polymeric matrix also affects the optical behavior of the films, since the smallest optical gap (2.16 eV) and onset gap (1.89 eV), and the highest transparency are obtained in the film with a PMMA matrix. Finally, the electrical behavior in hybrid films is also affected by the matrix: the largest amount of current carried is approximately 0.01 A for the PS:CuP film, and 0.0015 A for the PMMA:CuP film. Thanks to the above properties, hybrid films are promising candidates for use in optoelectronic devices.
Databáze: Directory of Open Access Journals
Nepřihlášeným uživatelům se plný text nezobrazuje