| Autor: |
Andreas Hofmann, Tim Grotz, Nico Köstler, Alexander Mahr, Frank Döpper |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Manufacturing and Materials Processing, Vol 8, Iss 3, p 112 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2504-4494 |
| DOI: |
10.3390/jmmp8030112 |
| Popis: |
Achieving a homogeneous and uniform powder bed surface as well as a defined, uniform layer thickness is crucial for achieving reproducible component properties that meet requirements when powder bed fusion of metals with a laser beam. The existing recoating processes cause wear of the recoater blade due to protruded, melted obstacles, which affects the powder bed surface quality locally. Impairments to the powder bed surface quality have a negative effect on the resulting component properties such as surface quality and relative density. This can lead either to scrapped components or to additional work steps such as surface reworking. In this work, an electric smoother is presented with which a wear-free and contactless smoothing of the powder bed can be realized. The achievable powder bed surface quality was analyzed using optical profilometry. It was found that the electric smoother can compensate for impairments in the powder bed surface and achieve a reproducible surface quality of the powder bed regardless of the initial extent of the impairments. Consequently, the electric smoother offers a promising opportunity to reduce the scrap rate in PBF-LB/M and to increase component quality. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
