| Autor: |
Gülsüm SAYIN ÖZEL, Ceyda AKIN, Bebek Serra OĞUZ AHMET |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Bezmiâlem Science, Vol 9, Iss 3, Pp 344-350 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2148-2373 |
| DOI: |
10.14235/bas.galenos.2020.4555 |
| Popis: |
Objective:This research aimed to evaluate the effect of different resin cement (RC) types, compare the effect of surface treatments and bonding applications and evaluate the effect of thermal cycling on bond strengths to Titanium (Ti) surfaces.Methods:A total of 240 Ti discs (10x3 mm) were randomly divided into two groups. Half of the specimens were sandblasted with 110 μm Al2O3 particles, whereas the other half had no surface treatments (non-treated). Both sandblasted and non-treated specimens of each surface treatment type were divided into five subgroups, which received one of the following surface conditions and luting self-adhesive resin cement: (a) Panavia SA Cement, (b) Clearfil SE Bond + Panavia SA Cement, (c) RelyX U200, (d) Single Bond Universal + RelyX U200 and (e) MIS Crown Set Cement. A mould with a 4-mm diameter and 2-mm thickness was applied to the central region of the specimens. Each group was divided into subgroups, according to whether performing thermocycling or not. The shear bond tests were conducted at a crosshead speed of 1 mm/min. Data (N) were analysed using one-way analysis of variance and Tukey’s honestly significant difference tests (p |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
