Experimental Analysis of Pretensioned CLT-Glulam T-Section Beams

Autor: J. Estévez-Cimadevila, F. Suárez-Riestra, D. Otero-Chans, E. Martín-Gutiérrez
Jazyk: angličtina
Rok vydání: 2018
Předmět:
Zdroj: Advances in Materials Science and Engineering, Vol 2018 (2018)
Druh dokumentu: article
ISSN: 1687-8434
1687-8442
DOI: 10.1155/2018/1528792
Popis: The bending behavior of T-section beams composed of a glulam web and an upper cross-laminated timber flange was studied. The influence of two fundamental factors on the bending strength and stiffness was considered: the wood species used for the webs and pretensioning with unbonded tendons. Sixteen specimens with a 9 m span were tested until failure: eight of them were nontensioned (4 Picea abies webs and 4 Quercus robur webs) and the other eight were pretensioned using threaded bars with 20 mm diameter anchored in plates fixed at the ends of the specimens (4 Picea abies webs and 4 Quercus robur webs). Pretensioning with unbonded tendons showed a clear improvement in the load capacity of the specimens with Picea abies webs, while the difference was not significant for the specimens with Quercus robur webs. Considering deflection, pretensioning gave the advantage of an initial precamber but also generated slight variations in the stiffness as a result of increasing the portion of the section that was in compression. The variation in the stiffness depended on the relation between the compressive and tensile moduli of elasticity parallel to the grain, and its influence on the deflection was analyzed using a finite element method.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje