Design and Material Optimization of Oil Plant Piping Structure for Mitigating Erosion Wear
| Autor: | Jun-Hyuk Ahn, Rabea Asif, Heon-Woo Lee, In-Ju Hwang, Jong-Wan Hu |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Applied Sciences, Vol 14, Iss 12, p 5234 (2024) |
| Druh dokumentu: | article |
| ISSN: | 14125234 2076-3417 |
| DOI: | 10.3390/app14125234 |
| Popis: | Erosion in piping structures poses a significant challenge for oil industries as the conveyance of solid particles leads to operational malfunctions and structural failures affecting the overall oil plant operation. Conventional oil recovery methods have historically dominated, while in response to the challenges imposed by declining conventional oil production, the global shift towards non-conventional methods necessitates a reevaluation of erosion mitigation strategies due to increased piping infrastructure. Therefore, in this study research has been conducted to reduce erosion and optimize the piping structure. Variables impacting the erosion in piping were investigated from the literature, and simulation cases were made based on the impacted variables. Computational Fluid Dynamics (CFDs) analysis was performed using the Discrete Phase Model (DPM) to determine the erosion wear rate in each simulation case; based on the CFD results, variables with low Turbulent Dissipation Rates (TDRs) and Erosion Rates (ERs) were determined, and the optimized piping structure was designed. As a result, the optimized piping structure showed an 80% reduction in the turbulent dissipation rate and a 99.2% decrease in the erosion wear rate. These findings highlight a substantial improvement in erosion control, ensuring the safety and longevity of piping structures in oil plant operations. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|