| Popis: |
We introduce CaLES, a GPU-accelerated finite-difference solver designed for large-eddy simulations (LES) of incompressible wall-bounded flows in massively parallel environments. Built upon the existing direct numerical simulation (DNS) solver CaNS, CaLES relies on low-storage, third-order Runge-Kutta schemes for temporal discretization, with the option to treat viscous terms via an implicit Crank-Nicolson scheme in one or three directions. A fast direct solver, based on eigenfunction expansions, is used to solve the discretized Poisson/Helmholtz equations. For turbulence modeling, the classical Smagorinsky model with van Driest near-wall damping and the dynamic Smagorinsky model are implemented, along with a logarithmic law wall model. GPU acceleration is achieved through OpenACC directives, following CaNS-2.3.0. Performance assessments were conducted on the Leonardo cluster at CINECA, Italy. Each node is equipped with one Intel Xeon Platinum 8358 CPU (2.60 GHz, 32 cores) and four NVIDIA A100 GPUs (64 GB HBM2e), interconnected via NVLink 3.0 (200 GB/s). The inter-node communication bandwidth is 25 GB/s, supported by a DragonFly+ network architecture with NVIDIA Mellanox InfiniBand HDR. Results indicate that the computational speed on a single GPU is equivalent to approximately 15 CPU nodes, depending on the treatment of viscous terms and the subgrid-scale model, and that the solver efficiently scales across multiple GPUs. The predictive capability of CaLES has been tested using multiple flow cases, including decaying isotropic turbulence, turbulent channel flow, and turbulent duct flow. The high computational efficiency of the solver enables grid convergence studies on extremely fine grids, pinpointing non-monotonic grid convergence for wall-modeled LES. |
