Honeycomb monolithic design to enhance the performance of Ni-based catalysts for dry reforming of methane
| Autor: | Agueniou, Fazia, Vidal, Hilario, Yeste, M. Pilar, Hernandez-Garrido, Juan C., Cauqui, Miguel A., Rodriguez-Izquierdo, Jose M., Calvino, Jose J., Gatica, Jose M. |
|---|---|
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Catalysis Today 383 (2022) 226-235 |
| Druh dokumentu: | Working Paper |
| DOI: | 10.1016/j.cattod.2020.07.030 |
| Popis: | Supported Ni catalysts (4,5% wt%) using a Ce-Zr oxide (18/82 molar ratio and a ceria rich surface) depicting advanced redox properties, were deposited by washcoating over cordierite honeycombs (230 and 400 cpsi). FIB-STEM unveiled nanostructure details otherwise undistinguishable by conventional techniques. The catalytic performance was evaluated in the dry reforming of methane al 700-900 degree C, using a CH4:CO2 1:1 feddstock, and exploring high Weight Hourly Space Velocity (115-346 L.g-1.h-1). The structured catalyts exhibited better performance than the corresponding powers, reaching values close to rhermodynamics limits for booth reactants conversion and H2/CO ratio, from 750 dgree C, and no deactivation was observed in prolongued experiments (24-48 h). This was related to both the high catalytic efficiency after being deposited with low loading on the cordierite and the intrinsic advantages of the monolithic reactor, like preventing from the kinetic control that operates in powdered samples under high WHSV or limiting the deactivation. Comment: 10 pages, 8 figures, 3 tables, 61 references |
| Databáze: | arXiv |
| Externí odkaz: |
|