Registration between DCT and EBSD datasets for multiphase microstructures
| Autor: | Ball, James A. D., Oddershede, Jette, Davis, Claire, Slater, Carl, Said, Mohammed, Vashishtha, Himanshu, Michalik, Stefan, Collins, David M. |
|---|---|
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Materials Characterization, October 2023, Volume 204, Page 113228 |
| Druh dokumentu: | Working Paper |
| DOI: | 10.1016/j.matchar.2023.113228 |
| Popis: | The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based reconstruction method, was used to map part of a dual-phase steel alloy sample. To assess the resulting microstructures that were produced by the DCT technique, an EBSD map was collected within the same sample volume. To identify the 2D slice of the 3D DCT reconstruction that best corresponded to the EBSD map, a novel registration technique based solely on grain-averaged orientations was developed -- this registration technique requires very little a priori knowledge of dataset alignment and can be extended to other techniques that only recover grain-averaged orientation data such as far-field 3D X-ray diffraction microscopy. Once the corresponding 2D slice was identified in the DCT dataset, comparisons of phase balance, grain size, shape and texture were performed between DCT and EBSD techniques. More complicated aspects of the microstructural morphology such as grain boundary shape and grains less than a critical size were poorly reproduced by the DCT reconstruction, primarily due to the difference in resolutions of the technique compared with EBSD. However, lab-based DCT is shown to accurately determine the centre-of-mass position, orientation, and size of the large grains for each phase present, austenite and martensitic ferrite. The results reveals a complex ferrite grain network of similar crystal orientations that are absent from the EBSD dataset. Such detail demonstrates that lab-based DCT, as a technique, shows great promise in the field of multi-phase material characterization. Comment: 15 pages, 11 figures. Preprint submitted to Materials Characterization |
| Databáze: | arXiv |
| Externí odkaz: |
|