| Popis: |
Zaključno delo opisuje analizo principa delovanja simetrične hidravlične manšete. Z enoosnimi materialnimi testi sta pridobljeni natezna in tlačna karakteristika, ki sta potrebni za konstrukcijo materialnega modela. Prikazano je iskanje in raziskava izbranega konstitutivnega modela hiperelastičnosti materiala. Ugotovljeno je, da je za konstrukcijo materialnega modela za nas najbolj primeren Marlowov model. Za kontrolo njegove točnosti je narejena še simulacija tlačnega testa, ki je bila izvedena za primerjavo in vrednotenje ustreznosti rezultatov. S postavljenim modelom je opravljena statična analiza delovanja hidravličnega tesnila ter analiza napetostnega stanja in kontaktnih tlakov tesnila po montaži. Narejena je tudi primerjava napetostnega stanja, v katerem cilinder obratuje pri različnih tlakih. In this thesis, an analysis of hydraulic piston seal working principles is presented. First, the searching and researching processes of the most suitable rheological model for the seal material are described. It was found that the most suitable material rheological model is Marlow's model of hyperelasticity. Then, the required uniaxial tension and compression tests were performed, which were needed for a set-up of the numerical material model. To test its accuracy, a simulation of the compression test was made and its results were evaluated. With the constructed material model, a statical analysis of the hydraulic piston seal was conducted. Finally, its results and findings related to the seal’s condition after mounting and at three different operating pressures were collected and evaluated. |
