| Autor: |
Prapavesis, Alexandros, Soete, Jeroen, Vanhulst, Johan, Mehdikhani, Mahoor, Sarlin, Essi, Kallio, Pasi, Seveno, David, Wevers, Martine, Van Vuure, Aart Willem |
| Rok vydání: |
2022 |
| Popis: |
In-situ testing capabilities of lab-scale industrial computed tomography are rapidly improving. In the present study, the compressive deformation behaviour of a flax fibre-reinforced epoxy composite is studied in an in-situ compression test with stepwise loading, during 3D imaging with X-ray Computed Tomography (XCT). The 3D volumes are processed with Digital Volume Correlation (DVC) to identify the deformation of each loading step. The natural variability of the flax texture served as an adequate speckle pattern for DVC. The precision and accuracy of the DVC were investigated prior to the analysis of the deformation volumes by digitally deforming the reference undeformed volume with a known strain of 2 %. The calculated global strain was in good agreement with the digitally applied strain. Subsequently, DVC was applied to the acquired reference and deformed volumes and the analysis was focused on the 3D strain field evolution between the consecutive loading steps. Strain localization regions were observed in the axial strain εzz and the in-plane strain εxx. In the subsequent loading steps, the onset of compressive fibre-kinking is observed as a rotating fibre inside the magnified strain region. The 3D strain field evolution allows for a better understanding of the deformation and failure mechanisms at the meso/micro-scale in natural fibre reinforced composites under compressive loads. ispartof: pages:1-7 ispartof: Proceedings of the 11th Conference on Industrial Computed Tomography (iCT) pages:1-7 ispartof: 11th Conference on Industrial Computed Tomography (iCT) location:Wels, Austria date:8 Feb - 11 Feb 2022 status: published |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
