River Floodplain 1D/2D Hydraulic Modelling Combined with Recent LiDAR DTM Technology
| Autor: | Goran Jeftenić, Julius Fabian, Srđan Kolaković, Slobodan Kolaković, Slavisa Trajkovic |
|---|---|
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Tehnički Vjesnik, Vol 28, Iss 3, Pp 880-890 (2021) Tehnički vjesnik Volume 28 Issue 3 |
| ISSN: | 1848-6339 1330-3651 |
| Popis: | The study presents problem of floods management for lowland rivers and provides solution for such complex task. The paper aims to elaborate a methodology for flood management model on large lowland rivers using precision digital terrain models (DTM) and combined 1D/2D unsteady flow model. The river Danube on the territory of Serbia was used with its tributaries for the development of the model. The length of the hydraulic model is 715 km and the achieved accuracy of the model, by comparing the calculated and observed levels on 10 water stations, is below 10 cm. Combined 1D/2D HEC-RAS model is adjusted by making use of the resulting high-resolution input. The ability of the combined 1D/2D model, based mainly on the high-accuracy input data, provides an accurate estimate of flood wave propagation. The result of this paper is a defined methodology providing sufficient accuracy to the hydraulic model of flood wave propagation in case of large lowland rivers, requiring acceptable short calculation time. Also, the methodology to specify relevant flood stage (design flood) which is used to determine levee crest elevation is developed in this paper. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|