Analyze the Mechanical Characteristics of Fabricated MMCs on Nanocarbon Influencing with Polymer Composites
| Autor: | N. Vinayaka, Anil Kumar Bodukuri, Ganesh K. Jadhav, N. Padmamalini, Sumit Kumar Pandey, M. Balasubramanian, J. Immanuel Durai Raj, M. Suresh Kumar, Balkeshwar Singh |
|---|---|
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Journal of Nanomaterials. 2023:1-10 |
| ISSN: | 1687-4129 1687-4110 |
| DOI: | 10.1155/2023/5985188 |
| Popis: | The intention of this research is to recapitulate the two different fillers like E glass fiber and nanocarbon fiber, which were utilized to fabricate the polymer matrix composites by the assistance of epoxy resin. The mechanical compression molding was influenced to produce the polymer-based nanocomposites under consideration of optimal process parameters. There are three different weight fractions E glass fiber (40%, 45%, and 50%), nanocarbon fiber (10%, 15%, and 20%), and epoxy concentrations (30%, 40%, and 50%), respectively, that were used to produce the polymer matrix composites. Those processing parameters were designed by the L9 Taguchi with DOE technique to conduct the mechanical tests like tensile strength and hardness properties. The signal-to-noise ratios were successfully accomplished to identify optimal process parameters for improving the individual responses. The ANOVA and interaction was additional supports to enhance the mechanical properties. The scanning electron microscope was used to examine the fracture surfaces at the tensile fracture specimens with optimal conditions. Moreover, the maximum mechanical characteristics were attained by the increasing of nanocarbon fiber in the processed polymer matrix composites. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|