Friction Performance Analysis of Reactor Coolant Pump Shaft Seal Based on Sensor and Computer Simulation

Autor: Qiuqin Gou, Shide Xiao, Xiaoming Chen
Rok vydání: 2022
Předmět:
Zdroj: Journal of Sensors. 2022:1-11
ISSN: 1687-7268
1687-725X
DOI: 10.1155/2022/7838491
Popis: In recent years, the state has put forward a grand plan to develop nuclear power in order to control environmental pollution and carbon emissions. In nuclear power plants, mechanical seals for reactor coolant pump play an important role in nuclear power safety production. However, China cannot independently produce such mechanical seals, and they are blocked by foreign related technologies, which has seriously affected China’s nuclear power development plan and the overall safety of China’s nuclear power operation. Under this background, this paper studies the friction performance of the shaft seal of the reactor coolant pump, uses the sensor to obtain the data of friction factors such as low-pressure leakage, effectively monitors the low-pressure leakage through calculation and simulation modeling, truly reflects the operating state of the reactor coolant pump, and provides a new research direction and experimental basis for further analysis of the friction performance of the shaft seal of the reactor coolant pump. The results show that under the joint action of the pressure difference and the force generated by the deformation of the moving ring plate, the cone angle formed on the seal end face is 1300.9 μ convergence gap of rad. When the inlet water temperature is 65°C, the leakage rate is 1867.8 L/h. The deformation of the moving ring deformation ring plate can hinder the increase of the deformation cone angle of the moving ring. The greater the thickness of the moving ring deformation ring plate, the greater the seal leakage rate. The inlet temperature of the sealing medium and the friction performance of the material also have an impact on the sealing performance.
Databáze: OpenAIRE
Externí odkaz: