Modelling and dynamic simulation of a supercritical, oxy combustion circulating fluidized bed power plant concept—Firing mode switching case
| Autor: | Markku Hänninen, Antti Tourunen, Hannu Mikkonen, Jari Lappalainen, Jenö Kovács |
|---|---|
| Rok vydání: | 2014 |
| Předmět: |
Air separation
Engineering Flue gas Power station business.industry Boiler (power generation) carbon capture and storage Control engineering Management Monitoring Policy and Law Combustion Pollution Industrial and Manufacturing Engineering power plants oxy combustion modelling General Energy firing modes dynamic process simulation Air preheater circulating fluidized beds Fluidized bed combustion Process simulation Process engineering business |
| Zdroj: | Lappalainen, J, Tourunen, A, Mikkonen, H I, Hänninen, M & Kovacs, J 2014, ' Modelling and dynamic simulation of a supercritical, oxy combustion circulating fluidized bed power plant concept-Firing mode switching case ', International Journal of Greenhouse Gas Control, vol. 28, pp. 11-24 . https://doi.org/10.1016/j.ijggc.2014.06.015 |
| ISSN: | 1750-5836 |
| DOI: | 10.1016/j.ijggc.2014.06.015 |
| Popis: | Dynamic process simulation provides a tool to evaluate operational issues of a new process concept before the plant construction. This paper studies a carbon capture and storage (CCS) capable power plant concept with a model including a supercritical once-through CFB boiler with gas and water steam sides, a turbine island, an interface from the air separation unit (ASU) and the control system to manage typical operational transients. Switching between the air and oxy firing modes is one of the key operations in oxy combustion processes. The selected mode switching strategy uses simultaneous linear ramps for the mass flows of the primary and secondary air, oxygen, and recirculated flue gas. The results show that the firing mode can be successfully switched within 25–37 min. The flue gas path difference between the air-firing and oxy-firing modes due to the flue gas recirculation causes significant differences in dynamic behaviour. The simulations emphasize importance of good control and coordination of the gas flows. Feedback control of the flue gas and/or oxidants O 2 content during the mode switching is suggested to improve robustness against disturbances, for example, in oxygen delivery, flow measurements, fuel feeding and combustion. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect