Fabrication of graphene–ZnO heterostructure-based flexible and thin platform-based UV detector

Autor: Ashish Kumar, Arathy Varghese, Vijay Janyani
Rok vydání: 2021
Předmět:
Zdroj: Journal of Materials Science: Materials in Electronics. 33:3880-3890
ISSN: 1573-482X
0957-4522
Popis: This work presents the performance evaluation of Graphene/ZnO Schottky junctions grown on flexible indium tin oxide (ITO)-coated polyethylene terephthalate (PET) substrates. The fabricated structures include chemical vapour deposition grown graphene layer on ITO-coated PET substrates. Polymethyl methacrylate assisted transfer method has been employed for the successful transfer of graphene from Cu substrate to PET. The smaller D-band intensity (1350 cm−1) compared to G-band (1580 cm−1) indicates good quality of carbon lattice with less number of defects. High-quality ZnO has been deposited through RF sputtering. The deposited ZnO with grain size 50–95 nm exhibited dislocation densities of 1.31270 × 10–3 nm−2 and compressive nature with negative strain of − 1.43156 GPa. Further, the electrical and optical characterization of the devices has been done through device I–V characterization and UV detection analysis. The UV detection capability of the device has been carried out with the aid of a UV-lamp of 365 nm wavelength. The fabricated graphene/ZnO photodetector showed good response to UV illumination. The device performance analysis has been done through a comparison of the device responsivity and detectivity with the existing detectors. The detectivity and responsivity of the fabricated detectors were 7.106 × 109 mHz1/2 W−1 and 0.49 A W−1, respectively.
Databáze: OpenAIRE
Externí odkaz: