Influence of concentration on the steady and oscillatory shear behavior of umbu pulp

Autor:	Edimir M. Brandao, Edimir A. Pereira, Soraia Vilela Borges, Maria Cristina Antun Maia
Rok vydání:	2008
Předmět:	Environmental Engineering Shear thinning Chromatography Chemistry Rheometer soluble solid content (°Brix) Apparent viscosity Viscoelasticity Shear rate Viscosity viscosity Dynamic modulus Composite material Shear flow Agronomy and Crop Science viscoelasticity
Zdroj:	Revista Brasileira de Engenharia Agrícola e Ambiental v.12 n.1 2008 Revista Brasileira de Engenharia Agrícola e Ambiental Universidade Federal de Campina Grande (UFCG) instacron:UFCG
ISSN:	1415-4366
DOI:	10.1590/s1415-43662008000100013
Popis:	In this experimental work the rheological behavior of umbu pulp has been studied by shear flow (pseudoplasticity, apparent viscosity) and in oscillatory mode (dynamic modules) in the linear domain of viscoelasticity. The studies were carried out with the use of a controlled stress Rheometer Haake RS 100, at different soluble solid concentrations (10, 15, 20 and 25 °Brix), measured at 30 °C. Tests in steady shear were conducted over a shear rate range of 0.1 - 300 s-1 and oscillatory measurements over a frequency range of 0.01 - 100 Hz. The results indicated that umbu pulp behaves as a non-Newtonian fluid, with pseudoplastic characteristics and yield stress appearance and exhibits tixotropic properties. Rheograms were fitted to the Herschel-Bulkey model. From the dynamic test the umbu pulp showed storage modulus (G') values that were always higher than loss modulus (G"), indicating weak gel-like behavior. Storage and loss modulus increased with increase in the concentration.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8dbb38d317bc91eea4b3afaee31bea36 https://doi.org/10.1590/s1415-43662008000100013 Zobrazit plný text záznamu