Influence of SLS processing parameters according to the new mathematical model on flexural properties
| Autor: | Ana Pilipović, Bogdan Valentan, Mladen Šercer |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
0209 industrial biotechnology
Materials science Fabrication Mechanical Engineering Mechanical engineering 02 engineering and technology Overlay 021001 nanoscience & nanotechnology Industrial and Manufacturing Engineering law.invention Selective laser sintering 020901 industrial engineering & automation Flexural strength law Production (economics) 0210 nano-technology Polymers Mechanical properties |
| Zdroj: | Rapid Prototyping Journal |
| ISSN: | 1355-2546 |
| DOI: | 10.1108/rpj-08-2014-0092 |
| Popis: | Purpose The purpose of this paper is the selection of production parameters in selective laser sintering – SLS for the production of quality products (e.g. good mechanical properties). The manufacturing procedure affects the properties, which is especially significant in additive procedures, as the products are not cheap and the procedure and material need to be optimally selected. Design/methodology/approach The paper presents an analysis of the fabrication parameters in selective laser sintering (SLS) that affect the flexural properties of the finished product. Findings The influence of a new parameter has been found, the overlay ratio, and using the mathematical and scheme method, the selection of parameters for obtaining the optimal flexural properties has been proposed. Originality/value The paper presents a new mathematical model for the calculation of the processing parameters in SLS of polymer products and gives a diagram for the determination of which parameters are the best to use for practical purposes. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|