How to Post-Process Experimental Results from the Flange Bulging Test? Application to the characterization of a Zinc alloy
| Autor: | Gérard Michel, Marc Milesi, Pierrick Malécot, Nathalie Boudeau, Ludovic Vitu, Nicolas Laforge, Stephan Manov |
|---|---|
| Přispěvatelé: | Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) (FEMTO-ST), Université de Technologie de Belfort-Montbeliard (UTBM)-Ecole Nationale Supérieure de Mécanique et des Microtechniques (ENSMM)-Université de Franche-Comté (UFC), Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC)-Centre National de la Recherche Scientifique (CNRS), Université de Technologie Belfort-Montbéliard (UTBM), Université de Franche-Comté (UFC), Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC) |
| Rok vydání: | 2018 |
| Předmět: |
[SPI.ACOU]Engineering Sciences [physics]/Acoustics [physics.class-ph]
Digital image correlation Materials science Alloy chemistry.chemical_element [PHYS.MECA]Physics [physics]/Mechanics [physics] 02 engineering and technology Zinc engineering.material Flange Stamping 021001 nanoscience & nanotechnology [SPI.MAT]Engineering Sciences [physics]/Materials Condensed Matter::Materials Science 020303 mechanical engineering & transports 0203 mechanical engineering chemistry Hardening (metallurgy) engineering [SPI.NANO]Engineering Sciences [physics]/Micro and nanotechnologies/Microelectronics Composite material 0210 nano-technology Anisotropy Tensile testing |
| Zdroj: | International Deep-Drawing Research Group 2018 International Deep-Drawing Research Group 2018, Jul 2018, Waterloo, Ontario, Canada |
| ISSN: | 1757-899X |
| DOI: | 10.1088/1757-899x/418/1/012086 |
| Popis: | International audience; Zinc alloys are used in a wide range of application such as electronics, automotive and building construction. Their various shapes are generally obtained by metal forming operation such as stamping. Therefore, it is important to characterize the material with adequatecharacterization tests. Sheet Bulging Test (SBT) is well recognized in the metal forming community. Different theoretical models of the literature for the evaluation of thickness and radius of the deformed sheet in SBT have been studied in order to get the hardening curve ofdifferent materials. These theoretical models present the advantage that the experimental procedure is very simple. But Koç et al. showed their limitation, since the combination of thickness and radius evaluations depend on the material. As Zinc alloys are strongly anisotropicwith a special crystalline structure, a procedure is adopted for characterizing the hardening curve of a Zinc alloy. The anisotropy is first studied with tensile test, and SBT with elliptical dies is also investigated. Parallel to this, Digital Image Correlation (DIC) measures are carried out. Theresults obtained from theoretical models and DIC measures are compared. Measures done on post-mortem specimens complete the comparisons. Finally, DIC measures give better results and the resulting hardening curve of the studied zinc alloy is provided. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|