Mining of rich iron ore deposits of complex structure under the conditions of rock pressure development
| Autor: | Mykhailo Fedko, Serhii Chukharev, Serhii Pysmennyi, Nataliia Shvaher |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
lcsh:GE1-350
0211 other engineering and technologies 02 engineering and technology 010501 environmental sciences engineering.material 01 natural sciences Volume (thermodynamics) Mining engineering Iron ore Ansys software engineering Extraction (military) Development (differential geometry) Rock pressure Geology lcsh:Environmental sciences 021101 geological & geomatics engineering 0105 earth and related environmental sciences |
| Zdroj: | E3S Web of Conferences, Vol 201, p 01022 (2020) |
| ISSN: | 2267-1242 |
| Popis: | The purpose of research is to increase the ore mass extraction ratio when mining rich iron ores by changing the shape of the stope chamber, as well as to substantiate its stable parameters under the conditions of the rock pressure manifestation. Used in mines existing methodologies for determining the structural elements of mining system are based on calculated equivalent spans of outcropping the stope chambers, which have a rectangular or tent shape. For the first time using the ANSYS software package, it has been determined that the formation of a compensation chamber of quasi-parabolic shape can significantly reduce the stresses concentration around the stope block. Thus, the formation of a stope chamber of a quasi-parabolic shape makes it possible to reduce vertical stresses as compared to horizontal ones without increasing horizontal pressure. When mining the extraction block, it is proposed to form the stope chamber of a quasi-parabolic shape with geometric parameters that directly depend on the parameters of the deposit, the depth of mining, and the direction of main stresses action. Dependences have been determined of the stresses value on the depth of mining and the physical properties of rocks, as well as on the length along the strike of the ore deposit. Thus, depending on the mining depth and length along the strike, rock pressure on the stope chamber of a quasi-parabolic shape decreases under non-uniform loading. The formation of a stope chamber of a quasi-parabolic shape will increase by 1.2 – 1.5 times the volume of pure ore that is recovered from the block. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|