Influence of Process of Straightening Ship Hull Structure Made of 316L Stainless Steel on Corrosion Resistance and Mechanical Properties
| Autor: | Jakub Kowalski, Milena Supernak-Marczewska, Krzysztof Emilianowicz, Łukasz Licznerski |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Austenite
Supersaturation Materials science corrosion resistance Precipitation (chemistry) Mechanical Engineering Metallurgy Naval architecture. Shipbuilding. Marine engineering VM1-989 020101 civil engineering Ocean Engineering 02 engineering and technology Atmospheric temperature range mechanical properties 0201 civil engineering Corrosion Carbide 020303 mechanical engineering & transports 0203 mechanical engineering 316l steel Hull flame straightening Chemical composition |
| Zdroj: | Polish Maritime Research, Vol 27, Iss 4, Pp 103-111 (2020) |
| ISSN: | 2083-7429 |
| Popis: | The AISI 316L type steel belongs to the group of chromium-nickel stainless steels. They are determined according to European standards as X2CrNiMo17-12-2 and belong to the group of austenitic stainless steels. Steels of this group are used for elements working in seawater environments, for installations in the chemical, paper, and food, industries, for architectural elements, and many others. The chemical composition of corrosion-resistant austenitic steels provides them with an austenite structure that is stable in a wide temperature range, under appropriate conditions for heating, soaking, and cooling. 316L steel plate was subjected to a technological treatment of hot straightening with an oxy-acetylene torch, which is not commonly used for this type of steel, mainly due to the lack of objective assessment of whether the austenitizing temperature has been achieved and the stability of the heat treatment process is ensured. The single-phase structure of austenite with high corrosion resistance, without precipitation of carbides, steel is obtained by supersaturation in water from 1100°C. The purpose of the presented research was to determine the usefulness of the flame straightening process for a ship structure made of 316L steel. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|