Debonding and impact damage in stainless steel fibre metal laminates prior to metal fracture
| Autor: | Tuomas Pärnänen, Essi Sarlin, Mikko Kanerva, Olli Saarela |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: |
fibre metal laminates
Materials science ta214 Scanning electron microscope Composite number Steel fibre Epoxy Interface Metal Deflection (engineering) Debonding fracture visual_art Ceramics and Composites visual_art.visual_art_medium impact Ultrasonic sensor Adhesive Composite material Civil and Structural Engineering |
| Zdroj: | Composite Structures. 119:777-786 |
| ISSN: | 0263-8223 |
| Popis: | An experimental drop-weight impact investigation was performed for stainless steel fibre metal laminates (FMLs) containing carbon-fibre and glass-fibre-reinforced epoxy layers. The purpose was to study the dependence of metal-composite debonding on the metal’s surface morphology, as well as the interaction between debonding and internal damage caused to a composite. Three different steel surface morphologies were studied for the steel-carbon FMLs. Force-contact time and deflection profile measuring, as well as ultrasonic scanning and scanning electron microscopy imaging, were used for impact damage evaluation. Debonding was found to proceed either at the metal and adhesive film interface or cohesively inside the adhesive film. The steel’s surface condition did not significantly influence impact response. The research also revealed that debonding between the lower metal sheet and composite part proceeded as mixed mode (I/II) fracture. Debonding was connected to the composite damages by several shear cracks located in the uppermost composite layer. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect