Estimation of the Effect of Production Parameters on Mechanical Properties of Sintered Steels using ANOVA
| Autor: | A. Jordan, M. Sułowski, Andrzej Czarski, Piotr Matusiewicz |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: |
powder metallurgy
lcsh:TN1-997 analysis of variance (ANOVA) Materials science Materials processing Powder metallurgy Metallurgy Metals and Alloys lcsh:TA401-492 Production (economics) Industrial chemistry lcsh:Materials of engineering and construction. Mechanics of materials lcsh:Mining engineering. Metallurgy |
| Zdroj: | Archives of Metallurgy and Materials, Vol 62, Iss 2, Pp 571-576 (2017) |
| ISSN: | 2300-1909 |
| Popis: | The object of the study was to assess the influence of selected production parameters of sintered Fe-Mn-Cr-Mo-C steels i.e. chemical composition, sintering temperature, sintering atmosphere and heat treatment on the following mechanical properties: impact toughness, hardness of the surface, tensile strength, bend strength after static tensile tests. In the investigations, the general linear model (GLM) of the multivariate analysis of variance ANOVA was used. All assumptions of ANOVA, i.e. randomization of the experiment, the normality of the residuals, equality of variance at different levels have been fulfilled and verified. The predictive strength of the constructed models expressed by the adjusted determination coefficient (R2adj) is at medium or large level – R2adj is in the range from 41.46% to 76.97%. This work is focused mainly on the ANOVA methodology. A wide physical interpretation of the results will be possible after the optimization of the ANOVA models used. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|