Progress in foam forming technology
| Autor: | Erkki Hellen, Kristian Salminen, Janne T. Keränen, Harri Kiiskinen, Jaakko Asikainen, Timo Lappalainen |
|---|---|
| Rok vydání: | 2019 |
| Předmět: | |
| Zdroj: | VTT Technical Research Centre of Finland-PURE Kiiskinen, H, Salminen, K, Lappalainen, T, Asikainen, J, Keränen, J T & Hellen, E 2019, ' Progress in foam forming technology ', Tappi Journal, vol. 18, no. 8, pp. 499-510 . https://doi.org/10.32964/TJ18.8.499 |
| ISSN: | 0734-1415 |
| DOI: | 10.32964/tj18.8.499 |
| Popis: | This paper summarizes recent developments in foam forming that were mainly carried out in pilot scale. In addition to improving the efficiency of existing processes and allowing better uniformity in material, a wide variety of raw materials can be utilized in foam forming. The focus of this paper is thin webs—papers, boards and foam-laid nonwovens, along with the pilot scale results obtained at VTT in Finland. For paper and board grades, the most direct advantage of foam forming is the potential to produce very uniform webs from longer and coarser fibers and obtain material savings through that. Another main point is increased solids content after a wet press, which may lead to significant energy savings in thermal drying. Finally, the potential to introduce “difficult” raw materials like long synthetic or manmade fibers into a papermaking process enables the manufacturing of novel products in an existing production line. This paper also briefly discusses other interesting foam-based applications, including insulation and absorbing materials, foam-laid nonwovens, and materials for replacing plastics. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|