Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project
| Autor: | Romagnoli, Giulia, Briz Monago, Jose, Calviani, Marco, Esala, Jaakko, Grenier-Boley, Edouard, Masi, Alessandro, Nuiry, Francois-Xavier, Perillo-Marcone, Antonio, Polzin, Tobias, Vlachoudis, Vasilis |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| DOI: | 10.18429/jacow-ipac2017-wepva109 |
| Popis: | For the LHC injectors upgrade (LIU) at CERN, the two PS (Proton Synchrotron) dumps will be redesigned and upgraded for the new high intensity beams. The EN-STI group is in charge of the design and installation of the new dumps, foreseen for the next CERN's Long Shutdown in 2019-2020. As internal dumps, the PS dumps have been installed in 1975 directly in the PS vacuum ring between the main bending magnets and they are operating since then. The dumps enter the beam line when requested by beam operation, with a 6 kg Cu block moved quickly with a spring-based mechanism. This Cu block is not expected to survive the impact of the future beams. A new design is presented for the dump core based on FLUKA-ANSYS coupled simulations. The dumps should work with any PS beam foreseen within LIU, be water cooled in ultra-high vacuum medium, and enter the beam chamber in less than 250 ms. The dump should be used 200000 times per year, with a lifetime of 20 years, with almost zero maintenance. The new challenging design is based on an oscillating thin blade shaving turn after turn the circulating beam. The material considered for the blade are Cu, Ti or CuCrZr with embedded cooling channels. Proceedings of the 8th Int. Particle Accelerator Conf., IPAC2017, Copenhagen, Denmark |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|